Categories ↠ Wheel Loaders ↠ Case 621C XT

Case 621C XT Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: Case ➔
Model: 621C XT ➔

General Specifications

Bucket

Breakout Force	27,809 lbs (12,614 kg)
Bucket Capacity - heaped	2 cu yd (2 cu m)
Bucket Capacity - struck	2 cu yd (2 cu m)
Bucket Width	8 ft (3 m)

Dimensions

Ground Clearance	1 ft (0 m)
Height - Top of Cab	11 ft (3 m)
Hinge Pin - Max Height	13 ft (4 m)
Wheelbase	10 ft (3 m)
Width Over Tires	8 ft (2 m)

Engine

Aspiration	Turbocharged
Bore	4 in (10 cm)
Displacement	359 cu in (5,885 cu cm)
Engine Model	6T-590
Gross Power	140 hp (104 kw)
Net Power	130 hp (97 kw)
Number of Cylinders	6
Power Measured @	2000 rpm
Stroke	5 in (12 cm)
Torque	425 lbs ft (576 nm)
Torque Measured @	1400 rpm
Torque Rise	31%

Hydraulic System

Dump Time	1.7 seconds
Lower Time	4.4 seconds
Pump Flow Capacity	62 gpm (233 lpm)
Raise Time	5.4 seconds

Operating Specifications

Alternator Supplied Amperage	65 amps
Cooling System Fluid Capacity	7 gal (26 l)
Engine Oil Fluid Capacity	4 gal (15 l)
Front Axle/Diff Fluid Capacity	3 gal (10 l)
Fuel Capacity	51 gal (193 l)
Hydraulic System Fluid Capacity	41 gal (153 l)
Operating Voltage	12 volts
Operating Weight	28,810 lbs (13,068 kg)
Rear Axle/Diff Fluid Capacity	3 gal (10 l)
Tire Size	20.5 R25
Transmission Fluid Capacity	2 gal (8 l)
Turning Radius	17 ft (5 m)

Transmission

Number of Forward Gears	4
Number of Reverse Gears	3
Transmission Type	Mechanical w/ electronic control

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon