Case W20C Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: Case ➔
Model: W20C ➔

General Specifications

Bucket

Bucket Capacity - heaped	2 cu yd (1 cu m)
Bucket Capacity - struck	2 cu yd (1 cu m)

Dimensions

Ground Clearance	2 ft (0 m)
Height - Top of Cab	10 ft (3 m)
Hinge Pin - Max Height	12 ft (4 m)
Length with Bucket on Ground	20 ft (6 m)
Reach at Max Lift and Dump	3 ft (1 m)
Wheelbase	9 ft (3 m)
Width Over Tires	8 ft (2 m)

Engine

Bore	5 in (12 cm)
Displacement	504 cu in (8,261 cu cm)
Engine Make	Case
Engine Model	A504BD
Gross Power	123 hp (92 kw)
Net Power	110 hp (82 kw)
Number of Cylinders	6
Power Measured @	2200 rpm
Stroke	5 in (13 cm)
Torque Measured @	1400 rpm

Hydraulic System

Dump Time	1.7 seconds
Lower Time	3.5 seconds
Pump Flow Capacity	48 gpm (182 lpm)
Pump Type	Dual-Stage
Raise Time	6.1 seconds

Operating Specifications

Alternator Supplied Amperage	40 amps
Cooling System Fluid Capacity	13 gal (49 l)
Engine Oil Fluid Capacity	4 gal (16 l)
Front Axle/Diff Fluid Capacity	4 gal (13 l)
Fuel Capacity	50 gal (189 l)
Hydraulic System Fluid Capacity	31 gal (117 l)
Operating Voltage	24 volts
Rear Axle/Diff Fluid Capacity	4 gal (13 l)
Transmission Fluid Capacity	8 gal (30 l)

Transmission

Max Speed - Forward	23 mph (37 kph)
Max Speed - Reverse	10 mph (16 kph)
Number of Forward Gears	4
Number of Reverse Gears	2
Transmission Type	Power Shift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon