Categories ↠ Wheel Loaders ↠ Caterpillar 910

Caterpillar 910 Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: Caterpillar ➔
Model: 910 ➔

The Caterpillar 910 Wheel Loader boasts a powerful engine, with a net power of 65 hp and a displacement of 317.4 cu in. It is equipped with a double-section gear hydraulic pump type, providing efficient operation with a dump time of 1.3 seconds and a raise time of 6 seconds. With an operating weight of 14,210 lbs and a bucket capacity of 1.4 cu yd, this wheel loader offers versatility and reliability for various construction and material handling tasks.

See all Caterpillar 910s for sale

Download a PDF of the Caterpillar 910 specifications.

General Specifications

?Model	910 Starting 2024 Model Year
Breakout Force	13567 lbf Starting 2021 Model Year
Bucket Capacity	2.16 cu yd Starting 2023 Model Year
Bucket Capacity cu. yd. (cu m)	1.7 - 4.6 (1.3 - 3.5) Starting 2020 Model Year
Engine	C4.4 ACERT Starting 2021 Model Year
Engine Power hp (kw)	100 (74.6) Starting 2023 Model Year
Engine type	Cat C3.6 Starting 2024 Model Year
Full-Turn Tipping Load	10,957 lbs (4,970 kg) Starting 2021 Model Year
Max Dump Height	9 ft (3 m) Starting 2021 Model Year
Max Dump Height ft. (m)	9.1 (2.7) Starting 2020 Model Year
Net Power	111 hp (83 kw) Starting 2021 Model Year
Operating Weight	17,822 lbs (8,084 kg) Starting 2021 Model Year
Operating?Weight	11,632 (5,276) Starting 2020 Model Year
Rated Bucket Capacity	1.7 cu yd Starting 2021 Model Year
Tip Load	13,237 (6,004) Starting 2023 Model Year
Travel Speed (Fwd/Rev)	25 / 25 mph Starting 2023 Model Year
Travel Speed	25 / 12.5 mph Starting 2024 Model Year

Bucket

Breakout Force	11632-16,291 lbs (5,276-7,389 kg)
Bucket Capacity - heaped	1 cu yd (1 cu m)
Bucket Width	7 ft (2 m)
Dump Clearance at Max Raise	8 ft (2 m)

Dimensions

Ground Clearance	1 ft (0 m)
Height - Top of Cab	10 ft (3 m)
Hinge Pin - Max Height	10 ft (3 m)
Length with Bucket on Ground	18 ft (5 m)
Reach at Max Lift and Dump	3 ft (1 m)
Wheelbase	8 ft (2 m)
Width Over Tires	7 ft (2 m)

Engine

Displacement	317 cu in (5,201 cu cm)
Engine Model	C3.6
Net Power	65 hp (48 kw)
Number of Cylinders	4
Power Measured @	2400 rpm

Hydraulic System

Dump Time	1.3 seconds
Lower Time	3.5 seconds
Pump Type	double section gear
Raise Time	6 seconds
Relief Valve Setting	2500 psi

Operating Specifications

Alternator Supplied Amperage	40 amps
Cooling System Fluid Capacity	7 gal (25 l)
Engine Oil Fluid Capacity	3 gal (11 l)
Front Axle/Diff Fluid Capacity	4 gal (15 l)
Fuel Capacity	30 gal (113 l)
Hydraulic System Fluid Capacity	15 gal (57 l)
Operating Voltage	12 volts
Operating Weight	14210-18,102 lbs (6,446-8,211 kg)
Rear Axle Oscillation	22 degrees
Rear Axle/Diff Fluid Capacity	4 gal (15 l)
Static Tipping Weight	9,877 lbs (4,480 kg)
Tire Size	15.5 x 25.8 PR
Transmission Fluid Capacity	6 gal (23 l)
Turning Radius	16 ft (5 m)

Transmission

Max Speed - Forward	15 mph (24 kph)
Max Speed - Reverse	7 mph (11 kph)
Number of Forward Gears	3
Number of Reverse Gears	1
Transmission Type	Planetary power shift

Caterpillar 910s currently for sale

A Caterpillar 910 From Wheeler Machinery Co. for $175,400.00 USD

A Caterpillar 910 From Altorfer Holdings for $143,000.00 USD

A 2022 Caterpillar 910 From Pittsfield Lawn & Tractor for $139,900.00 USD

A Caterpillar 910 From Zeppelin Baumaschinen for $95,000.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon