Categories ↠ Wheel Loaders ↠ Caterpillar 924G

Caterpillar 924G Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: Caterpillar ➔
Model: 924G ➔

The Caterpillar 924G Wheel Loader is a versatile and powerful machine designed for a variety of earth-moving tasks. With a bucket capacity of 2.2 cubic yards and a powerful engine providing a rated net power of 129 hp, this wheel loader is capable of handling heavy loads with ease. Its dimensions and operating specifications ensure efficiency and productivity on the job site, making it a reliable choice for construction and industrial applications.

See all Caterpillar 924Gs for sale

General Specifications

Axles

Axle Oscillation

12 degrees

Bucket

Bucket Capacities	2.2-3 cu yd (2-2 cu m)
Bucket Capacity - struck	2 cu yd (2 cu m)
Bucket Width	8 ft (3 m)

Cab

FOPS	SAE J231 JAN81 ISO 3449-1992 Level II
ROPS	SAE J1040 MAY94 ISO 3471-1994

Dimensions

Bucket Pin Height - Maximum Lift	12 ft (4 m)
Carry Height	1 ft (0 m)
Centerline of Front Axle to Hitch	5 ft (1 m)
Digging Depth	4 in (10 cm)
Dump Angle at Maximum Lift	45 degrees
Dump Clearance at Maximum Lift - 45 degrees	9 ft (3 m)
Fork Tine Length	4 ft (1 m)
Height - Center of Axle	2 ft (1 m)
Height - Top of Hood	85 in (216 cm)
Height - Top of ROPS/FOPS	11 ft (3 m)
Hinge Pin - Max Height	12 ft (4 m)
Length - Rear Axle to Bumper	6 ft (2 m)
Length w/ Bucket on Ground	24 ft (7 m)
Length with out Forks on Ground	25 ft (8 m)
Length with Bucket on Ground	23 ft (7 m)
Overall Height	16 ft (5 m)
Overall Height - Bucket Raised	16 ft (5 m)
Overall Length	23 ft (7 m)
Rack Back Angle - Carry	48 degrees
Rack Back Angle - Maximum Lift	58 degrees
Reach at Maximum Lift and 45 degrees Dump	2 ft (1 m)
Wheel Base	9 ft (3 m)
Wheel Base Length	9 ft (3 m)
Wheelbase	9 ft (3 m)
Width - Over Tires	8 ft (2 m)
Width Over Tires	8 ft (2 m)

Engine

Bore	4 in (10 cm)
Power Measured @	2300 rpm
Rated Net Power	129 hp (96 kw)
Stroke	5 in (13 cm)

Hydraulic System

Relief Valve Setting

3756.5 psi

Loader Hydraulic System

Bore (1)	4 in (11 cm)
Bore (2)	5 in (12 cm)
Dump	1.1 seconds
Lower, Empty, Float Down	2.7 seconds
Pump Flow - Implement Pump	40 gpm (152 lpm)
Raise	5.2 seconds
Stroke (1)	30 in (75 cm)
Stroke (2)	21 in (52 cm)
Total	9 seconds

Operating Specifications

Alternator Supplied Amperage	80 amps
Articulation Angle	40 degrees
Breakout Force	21,727 lbs (9,855 kg)
Cooling System Fluid Capacity	11 gal (40 l)
Dump Clearance at Full Lift and 45 degrees Dump Angle	9 ft (3 m)
Engine Oil Capacity	5 gal (20 l)
Engine Oil Fluid Capacity	5 gal (20 l)
Front Axle/Diff Fluid Capacity	6 gal (21 l)
Front Diff Fluid Capacity	6 gal (21 l)
Operating Voltage	24 volts
Reach - Full Lift and 45 degrees Dump	2 ft (1 m)
Rear Axle Oscillation	12 degrees
Rear Axle/Diff Fluid Capacity	6 gal (21 l)
Rear Diff Fluid Capacity	6 gal (21 l)
Static Tipping Load - Full Turn	15,163 lbs (6,878 kg)
Static Tipping Weight	17,359 lbs (7,874 kg)
Transmission Fluid Capacity	6 gal (23 l)
Turning Radius	17 ft (5 m)

Service Refill Capacities

Cooling System	11 gal (41 l)
Crankcase	4 gal (16 l)
Front	6 gal (21 l)
Fuel Tank	59 gal (225 l)
Hydraulic Tank	19 gal (70 l)
Rear	6 gal (21 l)
Transmission	6 gal (23 l)

Steering System

Maximum Working Pressure	3000 psi
Minimum Turning Radius - Over Tires	200 in (508 cm)
Steering Angle - Each Direction	40 degrees
Steering Cylinder, Two, Bore	3 in (7 cm)

Tires

Size	17.5-25PR (L-2)
Tread Width	6 ft (2 m)

Transmission

Max Speed - Reverse	14 mph (22 kph)
Number of Forward Gears	4
Number of Reverse Gears	3
Transmission Type	countershaft

Weights

Operating Weight

23,920 lbs (10,850 kg)

Caterpillar 924Gs currently for sale

A Caterpillar 924G From Ziegler CAT for $60,000.00 USD

A 2004 Caterpillar 924G From Clark Heavy Equipment for $59,500.00 USD

A 2007 Caterpillar 924G From McCoy Construction & Forestry for $58,000.00 USD

A Caterpillar 924G From Carter Machinery for $37,500.00 USD

A Caterpillar 924G From Holt Cat for $35,000.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon