Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Breakout Force | 34,396 lbs (15,602 kg) |
Bucket Capacity - heaped | 3 cu yd (2 cu m) |
Bucket Width | 9 ft (3 m) |
Dump Clearance at Max Raise | 10 ft (3 m) |
Ground Clearance | 2 ft (0 m) |
Height - Top of Cab | 11 ft (3 m) |
Hinge Pin - Max Height | 13 ft (4 m) |
Length with Bucket on Ground | 22 ft (7 m) |
Reach at Max Lift and Dump | 4 ft (1 m) |
Wheelbase | 10 ft (3 m) |
Width Over Tires | 9 ft (3 m) |
Aspiration | turbocharged |
Displacement | 365 cu in (5,986 cu cm) |
Engine Model | 1006-60TW |
Gross Power | 160 hp (119 kw) |
Net Power | 144 hp (107 kw) |
Number of Cylinders | 6 |
Power Measured @ | 2200 rpm |
Torque Measured @ | 1400 rpm |
Dump Time | 1.4 seconds |
Lower Time | 3.5 seconds |
Pump Flow Capacity | 67 gpm (255 lpm) |
Pump Type | variable displacement piston pumps with load sensing |
Raise Time | 5 seconds |
Relief Valve Setting | 3625 psi |
Alternator Supplied Amperage | 55 amps |
Cooling System Fluid Capacity | 13 gal (50 l) |
Engine Oil Fluid Capacity | 4 gal (15 l) |
Front Axle/Diff Fluid Capacity | 10 gal (39 l) |
Fuel Capacity | 61 gal (230 l) |
Hydraulic System Fluid Capacity | 56 gal (210 l) |
Operating Voltage | 24 volts |
Rear Axle Oscillation | 25 degrees |
Rear Axle/Diff Fluid Capacity | 10 gal (36 l) |
Static Tipping Weight | 21,907 lbs (9,937 kg) |
Tire Size | 20.5x25x12 ply (L2) |
Transmission Fluid Capacity | 6 gal (24 l) |
Turning Radius | 19 ft (6 m) |
Max Speed - Forward | 24 mph (38 kph) |
Max Speed - Reverse | 15 mph (24 kph) |
Number of Forward Gears | 4 |
Number of Reverse Gears | 3 |
Transmission Type | semi-autoshift full powershift |