Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Bucket Capacity - struck | 3 cu yd (2 cu m) |
Bucket Width | 9 ft (3 m) |
Dump Clearance at Max Raise | 9 ft (3 m) |
Dump Clearance at Max Lift | 9 ft (3 m) |
Fork Tine Length | 4 ft (1 m) |
Ground Clearance | 2 ft (0 m) |
Hinge Pin - Max Height | 13 ft (4 m) |
Hinge Pin Max Height | 13 ft (4 m) |
Length w/ Bucket on Ground | 24 ft (7 m) |
Length with Bucket on Ground | 24 ft (7 m) |
Max Lift Height | 13 ft (4 m) |
Reach at Max Height and Dump | 4 ft (1 m) |
Reach at Max Lift and Dump | 4 ft (1 m) |
Wheelbase | 10 ft (3 m) |
Width Over Tires | 9 ft (3 m) |
Max Torque | 590 lbs ft (800 nm) |
Number of Cylinders | 6 |
Power Measured @ | 2200 rpm |
Dump Time | 1 seconds |
Lower Time | 3.4 seconds |
Pump Type | Twin variable displacement piston pumps |
Raise Time | 5.9 seconds |
Relief Valve Setting | 3625 psi |
Alternator Supplied Amperage | 70 amps |
Engine Oil Capacity | 4 gal (14 l) |
Engine Oil Fluid Capacity | 4 gal (14 l) |
Front Axle/Diff Fluid Capacity | 10 gal (39 l) |
Front Diff Fluid Capacity | 10 gal (39 l) |
Operating Voltage | 24 volts |
Rear Axle/Diff Fluid Capacity | 10 gal (39 l) |
Rear Diff Fluid Capacity | 10 gal (37 l) |
Static Tipping Load - Bucket | 25,880 lbs (11,739 kg) |
Static Tipping Load - Forks | 18,274 lbs (8,289 kg) |
Static Tipping Weight | 22,161 lbs (10,052 kg) |
Turning Radius | 19 ft (6 m) |
Max Speed - Forward | 24 mph (39 kph) |
Max Speed - Reverse | 17 mph (27 kph) |
Max Speed Forward | 24 mph (38 kph) |
Max Speed Reverse | 17 mph (27 kph) |
Number of Forward Gears | 4 |
Number of Reverse Gears | 3 |
Transmission Type | Smooth shift powershift |