Categories ↠ Wheel Loaders ↠ JCB 457 HT SHL

JCB 457 HT SHL Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: JCB ➔
Model: 457 HT SHL ➔

The JCB 457 HT SHL Wheel Loader boasts impressive specs that make it a powerful and efficient machine for various construction and loading tasks. With a 258 horsepower engine and a bucket breakout force of 39341.6 lbs, this loader has a bucket capacity of 3.7 cu yd heaped and 2.9 cu yd struck. Its hydraulic system operates at 3190.8 psi with a pump flow capacity of 40.5 gpm, allowing for quick and precise movements. The JCB 457 HT SHL is designed to handle heavy loads with ease, making it a reliable choice for any job site.

See all JCB 457 HT SHLs for sale

General Specifications

Bucket

Breakout Force	39,342 lbs (17,845 kg)
Bucket Capacity - heaped	4 cu yd (3 cu m)
Bucket Capacity - struck	3 cu yd (2 cu m)
Bucket Width	9 ft (3 m)
Dump Clearance at Max Raise	13 ft (4 m)

Dimensions

Ground Clearance	2 ft (0 m)
Height - Top of Cab	11 ft (3 m)
Hinge Pin - Max Height	17 ft (5 m)
Length with Bucket on Ground	31 ft (9 m)
Reach at Max Lift and Dump	4 ft (1 m)
Wheelbase	11 ft (3 m)
Width Over Tires	9 ft (3 m)

Engine

Air cleaner	Intergrated pre-cleaner scavenged
Aspiration	Turbo Charged
Displacement	470 cu in (7,700 cu cm)
Emission Tier Level	EPA 40 CFR 89 / Tier 4 Final EU 97/68/EC/STAGE IV
Engine Model	6R1000
Engine Type	MTU
Fan drive type	Hydraulic
Gross Power	258 hp (192 kw)
Net Power	256 hp (191 kw)
No. of Valves	4
Number of Cylinders	6
Power Measured @	1600 rpm
Torque Measured @	1600 rpm

Hydraulic System

3190.8	220 bar psi
Dump Time	1.2 seconds
Lower Time	4.1 seconds
Pump Flow Capacity	41 gpm (153 lpm)
Pump Type	Variable displacement
Raise Time	5.8 seconds
Relief Valve Setting	3190 psi
Total cycle	11.1 seconds

Operating Specifications

Alternator Supplied Amperage	100 amps
Articulation Angle	40 degrees
Cooling System Fluid Capacity	11 gal (42 l)
DEF tank capacity	11 gal (42 l)
Engine Oil Fluid Capacity	7 gal (25 l)
Front Axle/Diff Fluid Capacity	9 gal (35 l)
Fuel Capacity	79 gal (300 l)
Full turn tipping load	19,862 lbs (9,009 kg)
Hydraulic System Fluid Capacity	36 gal (135 l)
Operating Voltage	24 volts
Operating Weight	47,274 lbs (21,443 kg)
Payload	9,932 lbs (4,505 kg)
Rear Axle Oscillation	11.5 degrees
Rear Axle/Diff Fluid Capacity	9 gal (35 l)
Transmission Fluid Capacity	11 gal (41 l)
Turning Radius	23 ft (7 m)

Transmission

Max Speed - Forward	23 mph (36 kph)
Max Speed - Reverse	15 mph (24 kph)
Number of Forward Gears	4
Number of Reverse Gears	3
Transmission Type	4 speed non-lock up converter ZF 4WG210

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon