Categories ↠ Wheel Loaders ↠ Mecalac AX 700

Mecalac AX 700 Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: Mecalac ➔
Model: AX 700 ➔

General Specifications

Bucket

Breakout force	787 lbs (357 kg)
Bucket Capacity - heaped	2 cu yd (1 cu m)
Dumping angle, top	45 degrees
Lifting force	3500 newton
Payload on forks, max. turned, frontal	4,630 lbs (2,100 kg)
Thrust force	3800 newton
Tipping load Standard bucket	7,055 lbs (3,200 kg)

Dimensions

Ground Clearance	1 ft (0 m)
Height - Top of Cab	8 ft (2 m)
Hinge Pin - Max Height	11 ft (3 m)
Length with Bucket on Ground	17 ft (5 m)
Reach at Max Lift and Dump	3 ft (1 m)
Wheelbase	7 ft (2 m)
Width Over Tires	5 ft (2 m)

Engine

Aspiration	Low-noise water-cooled turbo diesel engine
Battery	100 Ah
Engine Model	Deutz TD 2.9 L4
Net Power	68 hp (51 kw)
Power Measured @	2300 rpm
Torque Measured @	1800 rpm

Hydraulic System

Pump Flow Capacity	16 gpm (62 lpm)
Pump Type	Single circuit hydraulics with central gear pump

Operating Specifications

Alternator Supplied Amperage	95 amps
Front Axle/Diff Fluid Capacity	2 gal (6 l)
Fuel Capacity	23 gal (87 l)
Hydraulic System Fluid Capacity	16 gal (60 l)
Operating Voltage	12 volts
Operating Weight	10,384 lbs (4,710 kg)
Rear Axle Oscillation	11 degrees
Rear Axle/Diff Fluid Capacity	2 gal (7 l)
Steering Angle	40 degrees
Tire Size	12.5-18
Turning Radius	12 ft (4 m)

Transmission

Max Speed - Forward

13 mph (20 kph)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon