Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Breakout Force | 13,624 lbs (6,180 kg) |
Bucket Capacity - heaped | 2 cu yd (2 cu m) |
Bucket Capacity - struck | 2 cu yd (1 cu m) |
Dump Clearance at Max Lift | 9 ft (3 m) |
Fork Tine Length | 4 ft (1 m) |
Ground Clearance | 1 ft (0 m) |
Height - Top of Cab | 10 ft (3 m) |
Height at Hook Max Reach | 5 ft (1 m) |
Hinge Pin Max Height | 12 ft (4 m) |
Hook Height at Max Lift - standard | 19 ft (6 m) |
Length w/ Bucket on Ground | 21 ft (6 m) |
Length with out Forks on Ground | 21 ft (6 m) |
Max Lift Height | 12 ft (4 m) |
Reach at Max Height and Dump | 4 ft (1 m) |
Wheelbase | 9 ft (3 m) |
Width Over Tires | 7 ft (2 m) |
Aspiration | turbocharged |
Displacement | 244 cu in (3,998 cu cm) |
Engine Model | VME TD 40GA |
Gross Power | 96 hp (72 kw) |
Max Torque | 273 lbs ft (370 nm) |
Net Power | 91 hp (68 kw) |
Number of Cylinders | 4 |
Power Measured @ | 2200 rpm |
Torque Measured @ | 1400 rpm |
Dump Time | 1.1 seconds |
Lower Time | 3.3 seconds |
Pump Flow Capacity | 8 gpm (32 lpm) |
Pump Type | load sensing axial flow piston |
Raise Time | 4.4 seconds |
Relief Valve Setting | 3771 psi |
Alternator Supplied Amperage | 60 amps |
Cooling System Fluid Capacity | 6 gal (22 l) |
Engine Oil Capacity | 3 gal (11 l) |
Front Diff Fluid Capacity | 6 gal (24 l) |
Fuel Capacity | 45 gal (170 l) |
Hydraulic System Fluid Capacity | 28 gal (106 l) |
Operating Voltage | 24 volts |
Operating Weight | 17,860 lbs (8,101 kg) |
Rear Axle Oscillation | 12 degrees |
Rear Diff Fluid Capacity | 6 gal (24 l) |
Static Tipping Load - Bucket | 10,803 lbs (4,900 kg) |
Static Tipping Load - Forks | 14,595 lbs (6,620 kg) |
Tire Size | 15.5R25 |
Transmission Fluid Capacity | 2 gal (7 l) |
Turning Radius | 18 ft (5 m) |
Max Speed Forward | 23 mph (36 kph) |
Max Speed Reverse | 23 mph (36 kph) |
Transmission Type | VME power shift |