Categories ↠ Wheel Loaders ↠ New Holland W170C

New Holland W170C Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: New Holland ➔
Model: W170C ➔

General Specifications

Bucket

Breakout Force	31,385 lbs (14,236 kg)
Bucket Capacity - heaped	4 cu yd (3 cu m)
Bucket Width	9 ft (3 m)
Dump Clearance at Max Raise	10 ft (3 m)

Dimensions

Ground Clearance	1 ft (0 m)
Height - Top of Cab	11 ft (3 m)
Hinge Pin - Max Height	13 ft (4 m)
Length with Bucket on Ground	25 ft (8 m)
Reach at Max Lift and Dump	4 ft (1 m)
Wheelbase	11 ft (3 m)
Width Over Tires	9 ft (3 m)

Engine

Gross Power	195 hp (145 kw)
Max torque ISO TR14396	701 lbs ft (950 nm)
Number of Cylinders	6
Power Measured @	1800 rpm
Torque Measured @	1300 rpm

Hydraulic System

Dump Time	1.2 seconds
Lower Time	2.5 seconds
Pump Flow Capacity	55 gpm (206 lpm)
Pump Type	Tandem Variable
Raise Time	5.2 seconds

Operating Specifications

Alternator Supplied Amperage	65 amps
Engine Oil Fluid Capacity	4 gal (15 l)
Fuel Capacity	65 gal (246 l)
Hydraulic System Fluid Capacity	48 gal (180 l)
Operating Voltage	24 volts
Rear Axle Oscillation	24 degrees
Tire Size	235R25
Transmission Fluid Capacity	9 gal (34 l)

Transmission

Max Speed - Forward	23 mph (37 kph)
Max Speed - Reverse	16 mph (26 kph)
Number of Forward Gears	4
Number of Reverse Gears	4
Transmission Type	Powershift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon