Categories ↠ Wheel Loaders ↠ New Holland W170TC

New Holland W170TC Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: New Holland ➔
Model: W170TC ➔

General Specifications

Bucket

Bucket Capacity - heaped	4 cu yd (3 cu m)
Bucket Width	9 ft (3 m)
Dump Clearance at Max Raise	9 ft (3 m)

Dimensions

Ground Clearance	1 ft (0 m)
Height - Top of Cab	11 ft (3 m)
Hinge Pin - Max Height	13 ft (4 m)
Length with Bucket on Ground	26 ft (8 m)
Reach at Max Lift and Dump	4 ft (1 m)
Wheelbase	11 ft (3 m)

Engine

Aspiration	turbo aftercooler
Displacement	415 cu in (6,801 cu cm)
Engine Model	CNH F4HE0684J
Net Power	197 hp (147 kw)
Number of Cylinders	6
Power Measured @	2000 rpm

Hydraulic System

Dump Time	2.4 seconds
Lower Time	3.3 seconds
Pump Flow Capacity	55 gpm (206 lpm)
Pump Type	load sensing circuit closed centre
Raise Time	5.6 seconds
Relief Valve Setting	3626 psi

Operating Specifications

Alternator Supplied Amperage	50 amps
Cooling System Fluid Capacity	11 gal (40 l)
Engine Oil Fluid Capacity	4 gal (15 l)
Fuel Capacity	67 gal (253 l)
Hydraulic System Fluid Capacity	51 gal (193 l)
Operating Voltage	24 volts
Operating Weight	30,446 lbs (13,810 kg)
Rear Axle Oscillation	24 degrees
Static Tipping Weight	25,574 lbs (11,600 kg)
Tire Size	23.5-25 RT-3B
Transmission Fluid Capacity	11 gal (40 l)
Turning Radius	21 ft (6 m)

Transmission

Max Speed - Forward	24 mph (38 kph)
Max Speed - Reverse	16 mph (26 kph)
Number of Forward Gears	4
Number of Reverse Gears	3
Transmission Type	PowerShift CounterShaft

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon