Categories ↠ Wheel Loaders ↠ New Holland W50BTC

New Holland W50BTC Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: New Holland ➔
Model: W50BTC ➔

General Specifications

Bucket

Bucket Capacity - heaped	1 cu yd (1 cu m)
Bucket Capacity - struck	1 cu yd (1 cu m)
Bucket Width	6 ft (2 m)
Dump Clearance at Max Raise	8 ft (3 m)

Dimensions

Ground Clearance	1 ft (0 m)
Height - Top of Cab	9 ft (3 m)
Hinge Pin - Max Height	11 ft (3 m)
Length with Bucket on Ground	18 ft (5 m)
Reach at Max Lift and Dump	3 ft (1 m)
Wheelbase	7 ft (2 m)
Width Over Tires	6 ft (2 m)

Engine

Aspiration	Natural
Displacement	195 cu in (3,195 cu cm)
Engine Model	FPT F5C
Gross Power	54 hp (40 kw)
Net Power	50 hp (37 kw)
Number of Cylinders	4
Power Measured @	2300 rpm
Torque Measured @	162 rpm

Hydraulic System

Dump Time	1 seconds
Lower Time	3 seconds
Pump Flow Capacity	14 gpm (52 lpm)
Pump Type	Gear
Raise Time	6 seconds
Relief Valve Setting	3625 psi

Operating Specifications

Alternator Supplied Amperage	55 amps
Cooling System Fluid Capacity	4 gal (17 l)
Engine Oil Fluid Capacity	2 gal (9 l)
Front Axle/Diff Fluid Capacity	2 gal (8 l)
Fuel Capacity	27 gal (100 l)
Hydraulic System Fluid Capacity	15 gal (56 l)
Operating Voltage	12 volts
Operating Weight	10,174 lbs (4,615 kg)
Rear Axle/Diff Fluid Capacity	2 gal (8 l)
Static Tipping Weight	7,377 lbs (3,346 kg)
Tire Size	335/90 R18 SPT9

Transmission

Max Speed - Forward	12 mph (20 kph)
Max Speed - Reverse	12 mph (20 kph)
Number of Forward Gears	2
Number of Reverse Gears	2
Transmission Type	Hydrostatic

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon