Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Breakout Force | 7,420 lbs (3,366 kg) |
Bucket Capacity - heaped | 1 cu yd (1 cu m) |
Bucket Width | 6 ft (2 m) |
Dump Clearance at Max Raise | 8 ft (2 m) |
Ground Clearance | 1 ft (0 m) |
Height - Top of Cab | 8 ft (2 m) |
Hinge Pin - Max Height | 10 ft (3 m) |
Length with Bucket on Ground | 15 ft (5 m) |
Reach at Max Lift and Dump | 2 ft (1 m) |
Wheelbase | 6 ft (2 m) |
Width Over Tires | 5 ft (2 m) |
Displacement | 125 cu in (2,048 cu cm) |
Engine Model | KHD F 3 L 1011F |
Gross Power | 38 hp (28 kw) |
Net Power | 36 hp (27 kw) |
Number of Cylinders | 3 |
Power Measured @ | 2300 rpm |
Torque Measured @ | 1800 rpm |
Dump Time | 2.5 seconds |
Lower Time | 5 seconds |
Pump Flow Capacity | 9 gpm (32 lpm) |
Raise Time | 6 seconds |
Relief Valve Setting | 3050 psi |
Alternator Supplied Amperage | 60 amps |
Engine Oil Fluid Capacity | 2 gal (7 l) |
Front Axle/Diff Fluid Capacity | 2 gal (6 l) |
Fuel Capacity | 11 gal (42 l) |
Hydraulic System Fluid Capacity | 16 gal (60 l) |
Operating Voltage | 12 volts |
Operating Weight | 7,500 lbs (3,402 kg) |
Rear Axle Oscillation | 20 degrees |
Rear Axle/Diff Fluid Capacity | 2 gal (8 l) |
Static Tipping Weight | 5,512 lbs (2,500 kg) |
Tire Size | 10.5-18 |
Turning Radius | 12 ft (4 m) |
Max Speed - Forward | 13 mph (20 kph) |
Max Speed - Reverse | 13 mph (20 kph) |
Number of Forward Gears | 2 |
Number of Reverse Gears | 2 |
Transmission Type | hydrostatic full powershift |